A professional and robust LED fixture which combines high light output with outstanding light quality based is a rugged and durable aluminum construction and is supplied complete with softbox and large chinese lantern kit.
Variable Colour Temperature
It features controllable colour temperature from 3000-5700K and variable output without colour shift across a 1-100% dimming range.
It is passively cooled, so no fan or moving parts and silent operation.
Mains or Battery Operation
The SUMO100 combines low power consumption (90W) with the versatility of variable power inputs.
It can be powered from standard Anton Bauer batteries and the option of a set of 2 x Anton Bauer batteries and charger is available, though it can be powered by any 12-48V DC power supply or battery with standard 3-pin XLR. It is also mains powerable from 90 - 240V AC.
It will run on full power with an optional Anton Bauer Dionic 90 battery for at least 40 mins.
DMX / RDM CONTROLS
The SUMO100 can function independently, as a Master controller for additional Sumolights via integrated DMX/RDM, or as a slave using a DMX console or another Sumolight. The intensity and colour temperature, can both be controlled.
- DMX / RDM protocol support for use with dimmer boards
- Master / Slave control mode – one light can control others; no dimmer board necessary
The values correspond to the SUMO100 Bi-Color model at 4300 K. The overall intensity of the Daylight model is 5% higher and the Tungsten model 5% lower.
VMI Sumo 100 Package
- Sumo 100 bi-Colour 3000-5700 LED Lamp Head
- 1 Sumo 100 Honeycombe 60
- 1 Sumo 100 Softbox
- 1 Sumo 100 Lantern 1/2 Diffusion
- 2 x Anton Bauer Dionic HC Batteries
- Anton Bauer 2-way charger
The SUMOLIGHT Snap-Open/Snap-On Softbox is unfolded in seconds and connects with a few easy steps directly to the eight snap connectors on the fixture. Using a speedring is unnecessary. The spring steel rods stay permanently in the softbox. There is no need to remove them for packing. The softbox can be folded up with the rods inside, as in the picture on the right. The softbox has a highly reflective coating on the inside to ensure maximum utilization of the light. Each softbox kit includes 3 different diffusion panels (1/4, 1/2 and full diffusion).
Dimension 40 x 31 x 24 cm
Diagonal 48 cm
Weight 245 g
MICRO LENS DIFFUSION
The Micro Lens Diffusion softens the light with very little loss (about 8%, less than one eighth of a stop). This is achieved via a hexagonal lenslet array on one side, which spreads the beam approximately 10°. Thus the combination of 60° Optic and 10° Micro Lens Diffusion results in an approximately 70° beam angle (30°+10°= 40°). It is made of unbreakable polycarbonate, and fastened to the slot on the front of the fixture.
Dimension 300 x 225 x 2 mm
Weight 212 g
The perfect complement to the softbox is the Softgrid, which directs the output and controls spill light. Reduces the near-to-far light ratio, which allows you to have more even lighting when a subject is moving towards or away from the light. It has a 40° cut off angle. It is attached with Velcro to the inner sides of the softbox.
Dimension 40 x 31 x 5 cm
Weight 78 g
The SUMOLIGHT Snap-Open/Snap-On Lantern radiates soft light in all directions. It is available in 1/4, 1/2 and full diffusion. This lantern is unfolded in seconds and connects with a few easy steps directly to the eight snap connectors on the fixture. Using a speedring is unnecessary. The spring steel rods stay permanently in the lantern. There is no need to remove them for packing. In order to fold the lantern, place it with the front side down and then fold the individual sides flat so that they overlap, beginning with the two long sides.
Diffusion 1/4, 1/2 and full diffusion
Dimension 40 x 31 x 24 cm