Ignite Digi Canbuster

for NODO Inertia Wheels

£50/day
£150/week

CANBUSTER mounts to DJI Transmission and allows you to control Ronin 4D, Inspire 3, Ronin 2 and RS3 Pro with NODO Inertia Wheels For Ronin 4D and Inspire 3, control more than just the gimbal — adjust focus, iris, zoom and run/stop Get the cleanest build possible by sending both Inertia Wheels control data and wireless video over DJI Transmission. Fewer cables. Fewer boxes. Take advantage of Transmission's ultra-long wireless range of up to 4 miles to come up with truly extreme shots
Manufacturer

Ignite Digi

Using the Inertia Wheels API, CANBUSTER enables Inertia Wheels to control more parameters in both the gimbal and the camera. For Ronin 4D and Inspire 3, control focus, iris, zoom, run/stop and more. If using the DJI LiDAR Range Finder system you will have FIZon/FIZoff. For Ronin 2 and RS3 Pro you retain recenter, run/stop and full Pan/Tilt/Roll (PTR) control.

CANBUSTER can control the following:

DJI RONIN 4D
Control PTR + Run/Stop + Recenter + Focus/Iris/Zoom + Mode Change + FIZon/FIZoff

DJI INSPIRE 3
Control PTR + Run/Stop + Recenter + Focus/Iris + FIZon/FIZoff

DJI RONIN 2
Control PTR + Run/Stop + Recenter + FIZon/FIZoff with DJI LiDAR Cable Hub

DJI RS3 PRO
Control PTR + Run/Stop + Recenter + Focus + FIZon/FIZoff with DJI LiDAR Cable Hub

FEATURE NOTICE
At present, Inertia Wheels FX and Playback/Record are not compatible as they are processed in the Inertia Wheels Receiver which is bypassed with CANBUSTER. A future firmware update for the Inertia Wheels is planned to enable these features.

COMPATIBLE WITH
DJI Transmission
NODO Inertia Wheels Brushless
NODO Inertia Wheels MAX

MODULE MADE FROM
High-grade 6061-T651 aluminium billet
Hard anodised

IN THE BOX
CANBUSTER Module
24-inch / 60cm Control Cable
Holographic sticker

WEIGHT
4.3oz / 122g module only

DIMENSIONS
1.25 x 2.48 x 1.88” / 32 x 63 x 48mm

1x Ignite Digi Canbuster
1x 9-pin Lemo to 5-pin Lemo cable

You may also like…

VMI are proud sponsors of: