Camera kits

Easyrig Mini Strong (4-6kg)

Easyrig Camera Body Mount

  • Description
  • Rates & Packages
  • Case Studies

The Easyrig Mini Strong Camera Support supports from 4-6kg (9 to 13 lbs) of camera weight, takes the strain of the camera from your arms, leaving you with the sole job of pointing camera where you want to shoot.

The metal feathers inside the Mini Strong specifically support 9 to 13 lbs. If your camera weighs just under 9 lbs -- if it's 8.5 lbs, for example -- then you can, and even should, still go with the Mini Strong and compensate for weight shortage by leaning the weight of your arms onto the system. The reason for going with the Mini Strong in such case is that a future addition of another accessory or two to your camera will likely bring the weight of your camera to over 9 lbs. If your camera, however, is much lighter than 9 lbs, then it will not level when you let it swing free, and a better option would be the Easyrig Mini, as opposed to the Mini Strong.

For attaching to a camera, the Easyrig features a rubber-grip, spring-backed hook that clamps onto a camera handle. The hook tightens securely in place by a knob on its side. If your camera doesn't have a handle, you can attach an optional common-sized 1/4"-20 or hot-shoe handle to it, whether you're working with a DSLR or camcorder.

Tied into a strong knot on the underside of the hook is a high-quality Marlow rope that can handle up to 440 lbs of weight pressure. Marlow ropes are known across many industries, including yacht racing, windsurfing, and climbing. The rope is bound to the lower portion of a crane-resembling support bar, and its resistance power is controlled by a knob on the Easyrig's back cover. Four additional knobs let you adjust the height of the support bar. And a hip strap securely wraps the Easyrig around your waist.

A protective transport bag also comes included and fits not only the Easyrig but also your camera and many of its accessories.

Just Direct the Camera
Supports 9 to 13 lbs (4-6kg) of camera weight
Relieves the strain of weight from your arms
All that's left for you to do is regulate the camera 

Daily Rate - £55 per day or £110 per week

For your DSLR or Camcorder
Attaches to a camera handle by a spring-loaded rubber-grip hook
A 1/4"-20 or hot-shoe handle can be attached to a camera without one
The camera hook securely tightens onto the handle by an adjustable knob
A Marlow rope is tied strongly in a knot on the underside of the camera hook
The rope is 3 mm in diameter and can handle up to 440 lbs of weight pressure

The rope's resistance power is controlled by a knob on the back cover of the Rig

The rope is bound to a crane support bar height-adjustable by four additional knobs

 

frameborder="0" allowfullscreen>

Enables the weight of a shoulder mount camcorder to be taken by a body harness. This version takes cameras 4-6KG.

more...


  • Rate:
    £55/day £220/week Add to Shoot Kit

VMI are proud sponsors of:

The British Society of Cinematographers The Guild of Television Cameramen The Guild of British Camera Technicians Plasa - Rental Guard Plasa member Cinematography Mailing List Xhire - Anri fraud network