Matthews Round-D Dolly with Bazooka Column

Medium weight steerable doorway dolly

£104/day
£312/week

The Matthews Round-D 4-wheel steerable dolly.  Supplied with dual seat and offset arm plus selection of pneumatic and track wheels, this is a compact and very solid dolly complete with riser kit which will run on all track, operates through standard doorways and with its all-wheel steering, can negotiate an extremely tight circle of 6' (1.8 m). There is an gas bazooka option to add to fixed 2-stage bazooka available.
Manufacturer

Matthews

The camera operator is able to mount into six different fixed locations and steering is possible from both ends of the dolly. In addition to being able to mount the seat directly onto the post, the included offset arm can be installed to give the camera operator more choices for seating positions and camera angles. A second seat and offset arm can also be installed (standard on VMI package), giving you the possibility of having a second person seated on the dolly. This ingenious engineering concept provides virtually unlimited camera and operator positioning as the dolly rolls on track with either Hot Buttons or the Matthews Centipede. Of course, using the dolly directly on the ground with the standard pneumatic rubber tires is another option. Load capacity is over 1100 lb (500 kg) and the platform is carpeted for a non-slip low maintenance surface. This economical yet versatile mobile camera platform is an excellent choice for stage or location

  • All-wheel steering will navigate tight 90 degree corners.
  • Steering with the push/pull bar is possible from either end of this dolly
  • With a length of 51″ (130 cm) and a width of 28.25″ (72 cm), the Round-D-Round Doorway Dolly will operate through standard sized doorways

VMI Round-D Kit

  • Matthews Round-D 4-wheel steerable flatbed Dolly
  • 4 x Pneumatic wheels
  • 4 x track wheels
  • 2-stage riser kit
  • 100mm offset bowl, suitable for Sachtler Video 18/20 and O’Conner 1030 heads (not supplied)
  • 150mm bowl option available at additional cost, suitable for Sachtler Cine 30/O’Conner 2060 and 2575 in bowl config. (not supplied)
  • 2 x seats
  • *** Note tripod not supplied ***
  • Type of wheels: Pneumatic/ Track
  • Length     51″ (130 cm)
  • Width     28.25″ (72 cm)
  • Load Capacity     1100 lb (500 kg)
1 x H-Bar Handle Column
1 x Matthews Round-D Dolly
1 x Pneumatic Wheels
1 x T-Bar Steering Column
2 x Side Panel
2 x Padded Seats
2 x Seat Offset
2 x Seat Risers
1 x Bazooka Section 10"
1 x Bazooka Section 12"
1 x Ronford Bowl Adapter 100mm (Offset)
4 x Track Wheels
1 x Spanner 28mm
Main Unit (does not fold) 130 x 72
Matthews accessory crate 60 x 40 x 42
Peli Case Matthews Dolly Wheels

You may also like…

VMI are proud sponsors of: