Litemat Litemat S2 PLUS 2L LED Panel 11.5″ x 40″ (29cm x 101cm)

Versatile Hybrid 24v With goldmount battery clip

£81/day
£243/week

Building on the success of the original LiteMat, with its thin and ultra lightweight housing, soft colour-correct Hybrid (bi-colour) output, and convenient mounting options, the S2 LiteMat takes lighting to the next level. The new S2 LiteMat is nearly 40% brighter than the original LiteMat, has better colour quality, and a widely extended Kelvin range all without an increase in power draw.
Manufacturer

Litemat

Lighting Technology

LED Panel

The LiteMat+ Plus 2L is based on two “tiled” light engine measuring 9.5″ x 19″ (240mm x 480mm). The head unit features 1152 new CineMitter LEDs and is covered by a thin, clear polycarbonate layer and bordered entirely with Velcro® “loop” fastener. Mounting is provided with a Kino Flo®-compatible, removable gimbal mount. The “soft-through-pixelization” method allows the LiteMat+ Plus 2 to achieve surprisingly bright light levels.

Simple, Lightweight, and Versatile.

LiteMat can be used anytime that soft and controllable light is required. As a key light, you can easily mount the unit on a “Baby” stand or attach it to an elevator wall with adhesive Velcro®. Because it’s lightweight, LiteMat makes a great handheld fill light or can easily be mounted overhead.

Full spectrum colours with new CineMitters

Efficient and full-spectrum daylight and tungsten with the new LiteGear CineMitter series of applied-phosphor LEDs. These new emitters set the standard for cinematic, colour-correct LED lighting. These LED chips offer state-of-the-art output with a 40% increase in brightness over VHO Pro. Another distinct feature of the CineMitter is the extended Kelvin range. LiteGear pushed the lower CCT to 2600 degrees Kelvin (K) allowing for candlelight or deep-tungsten output while increasing the CRI to a staggering 95+ — that’s nearly indistinguishable from traditional incandescent sources! On the cool side, the CCT was pushed up to 6200K to better balance for overcast sky or cool white fluorescents. This increase in CCT still achieves a CRI of 95+ and provides beautiful, full-spectrum daylight.

LiteDimmmer+ included.

LiteDimmer+ Plus incorporates a singular power supply which is powered by either AC or DC power. The Hybrid 24V dimmer supplied features a single V-Lok battery clip which powers from a single battery and since the unit is 24V powerable, incorporates an integrated inverter to convert a 14V input to 24V.  Note that this dimmer does not feature DMX control.

Features

  • Super-bright output and only max 100W power draw (4.1A)
  • Modern fixture design with integrated power supply
  • Intuitive and ergonomic controls for dimming, colour and fixture set up
  • Single V-Lok battery powerable with V-Lok clip (24V input)
  • OptionalDOP Snapgrid Lite Mat Two Long 40 degree.

Dimensions: 11.5″ x 40″ x 0.9″  (29cm x 101 x 2.3cm)
Weight: 3.8lb (1.7kg)

LiteMat+ Plus 2L Mechanical and Electrical Specifications

LiteMat+ Plus 2L Photometric Specifications

LiteMat+ Plus 2L Beam Spread

Kit Contents:
Litegear LiteMat2L Hybrid lighting Head
Litegear LiteMat Header Extension Cable 3M
Litegear LiteMat AC Adapter (GST280A12-C6P)
Litegear LiteMat 2 Lite Dimmer Plus AB mount
Litegear LiteMat Ram Type Stand Mount
Litegear LiteMat Power Supply Mount Plate V-Mount
Litegear LiteMat Lite Dimmer Plus Remote Trigger Minijack
Litegear LiteMat2 Parasquare Louver Silver
Mains Cable 16A(M) to IEC(F)
Mains Cable IEC
Litegear LiteMat2 Carry Bag
Litegear LiteMat2 Full Diffuser Cloth
Litegear LiteMat2 Half Diffuser Cloth
Litegear LiteMat2 Quarter Diffuser Cloth

You may also like…

VMI are proud sponsors of: