iFootage Sharkslider 1.2m Wireless 3-axis Remote Time Lapse Control Slider Kit S1A3 (8kg payload)

Remote Time Lapse Control Slider Kit S1A3

£179/day
£537/week

1.2m lightweight slider complete with 3-axis full timelapse kit to allow camera movements on two axis: 90° tilt and 360° pan.  Please note that no camera is supplied, nor any timelapse control system (intervalometer), which clients are expected to provide themselves, or to hire from VMI.  Payload capacity of timelapse Motion Kit: Up to 8kg payload (17 pounds).
Manufacturer

iFootage Sharkslider

Unlike other sliders, the iFootage system incorporates a control panel for full programming and control of the timelapse slider kit without the need to use a mobile phone.

The system provides steady and automatic movements for time-lapses and shooting while panning as well as panoramas. Its main components are the electronic motor section, the wireless motorised controller and the Motion X2.

*Please note that the wireless shutter controller is no longer provided, as this has proven to be unreliable, so clients are advised to supply their own intervalometer or hire this separately from VMI.

Payload capacity of timelapse Motion Kit: Up to 8kg payload (17 pounds). 

Full 3 axis Remote Time Lapse Control with Programmable Pan and Tilt Function

The system is completely programmable being able to register up to 9 different tracks with pre-recorded movements. The tracks are easily accessible from the data packet and can be reused as needed. With repeated moves at different lengths of time, a wide range of visual effects can also be achieved easily. In addition, the S1A3 offers ‘Manual Mode’ which is perfect for run-and-gun style without losing precision. Its user friendly interface allows you to grab shots on-the-fly with no pre-programmed motion control.

Time lapse and stop motion

iFootage Single Axis’ strength is the time-lapse shoot and 360° panoramas*. It controls the time-lapse by the number of stills as well as length of time*. It has an Ease In/Out function and a Preview setting which helps users understand the video effect before shooting therefore increasing their success rate. Stop motion is also made easy with the S1A3. All you have to do is set up the number of frames and the time and then simply advance through each position to achieve a flawless end product* *Timelapse intervalometer not provided with system. Our system perfectly integrates with Autopano, allowing you to create beautiful 360° panoramic images. Also the system allows you to do simple parallax adjustments for various cameras.*

Solidly Built

The build quality of S1A3 is noticeable improved. It performs flawlessly in extreme environments withstanding even the harshest of conditions. Solid aluminium and quality craftsmanship are trademarks of iFootage products, and this system benefited fully from this. It is solid and sturdy, supporting a maximum load of 8kg. It has a working time of approximately 12 hours in a continuous video shoot or about 16 hours in time-lapse mode.

This is a terrifically elegant system which has 2 x removable modules which when fitted allow:

  • 8kg (17 lb) payload capacity
  • Remote slider control,
  • Remote pan and tilt operation
  • Leans from your hands – record your slide, pan and tilt and the system plays it back smoothly
  • Or set points and, speed and acceleration and run slide at a single button push
  • Includes operational module, so you don’t need to operate with your phone
  • Quick setup time
  • *No intervalometer provided.
  • Operating time of approx 12 hours for continuous video shoot or 16 hours in time lapse mode

** Note that you can mount this on the top of a tripod but it would be advisable to include 2 x monopods on either side for stability.

Time Lapse Camera Control

*Please note that the wireless shutter controller is no longer provided, as this has proven to be unreliable, so clients are advised to supply their own intervalometer or hire this separately from VMI.

Payload: 8kg

Kit Contents:
Ifootage Shark Slider S1
Ifootage Motion Pan Tilt head Motion X2
Ifootage Shark Slider Motor Section incl Belt
Ifootage Motion Wireless Controller S1A1W
2x Ifootage Shark Slider S1 Extended Track
2x Ifootage Shark Slider S1 Drive Belt
Ifootage Shark Slider S1 Steering Counterweight
2x Ifootage Shark Slider S1Top Mounting Bracket
Ifootage Shark Slider S1Top Mounting Bracket Plate
4x Ifootage Shark Slider S1 Screws
4x Ifootage Shark Slider S1 Feet incl screw
Ifootage Shark Slider S1 Rubber Stopper
Ifootage Shark Slider S1 Steering Motor Unit Sprocket
Aerial Alexa/ Bolt 2000/600 RX Articulated 4"Small
2x Power Cable D-Tap - 2.1 Co-Axial
Cable 2.1 Co-Axial Ext
Ifootage USB Cable
13 Amp USB Plug / Charger
iFootage Shark Slider Peli Case
Ifootage Shark Slider S1 Soft Bag
iFootage Shark Slider flight case
Power kit: Hawkwoods 5-way 98WH Mini V-Lok (to V-Lok) Battery Kit
2x Power Cable Figure 8
Peli case Hawkwoods 98Wh Mini V-Lock

You may also like…

VMI are proud sponsors of: