Audio Ltd RMS 2040 Diversity Radio Mic kit

Digital diversity radio mic system

£30.00 / day
£120.00 / week

Audio Ltd RMS 2040 digital diversity radio mic with Tram mic capsule.

Suitable for Europe-wide use

Unique infrared interface

The new TX2040 transmitter features Audio’s unique infrared interface,which allows the transmitter to be controlled remotely. The sound professional can use the Control-X device to switch the transmitter On/Off, even when it is worn beneath clothing – great for film and drama. The device displays the frequency on which the TX2040 is operating, enabling the sound engineer to identify the particular transmitter, even when it can’t be seen. The remote control features can also be operated by the SwitchiR control system, or from a Palm PDA, using free downloadable Palm AudiR software.

Compact design

The absence of mechanical switches on the TX2040 reduces wear, and ensures a greater degree of water proofing, for improved durability and reliability. The battery compartment is integrated into the transmitter case, to prevent the battery coming a drift in use, and has been designed to accommodate larger 9V batteries. The TX2040 will often last for a full day without the need to replace the batteries.
32 pre-programmed frequencies
The unit has 32 pre-programmed frequencies, with a switching bandwidth of up to 24MHz, which is the equivalent of three European TV channels, or four US channels. Despite its host of new features, the transmitter remains the same size as its predecessor the TX2020, and is fully backward compatible with earlier Audio systems. As with all our products, RF and audio performance are excellent.
Designed for comfort
The TX2040 is compact, sleek and stylish, with rounded edges to make it more comfortable for the artist to wear.
  • Frequency range from 470 – 1000MHz
  • Number of frequencies 32 pre-programmed
  • Switching range up to 24MHz
  • System frequency response 50Hz to 18kHz ±1dB
  • Output power 50mW nominal
  • System THD measured at 1KHz <0.1% at working levels.
  • <0.3% at gain position 9 with ?6dB input in overload?
  • Gain control range 28dB in 8 steps plus 2 steps for 600Ω line input
  • Maximum input level +8dBm gain position 0, 600Ω
  • Indicators Red LED for ON condition. LED turns off to indicate overload
  • Battery required 9V (IEC 6LR61) type Alkaline
  • Battery life Typically >6 hours on an alkaline 9V battery
  • Size 89 (h) x 60 (w) x 21 (d) mm
  • Weight 135g
  • Operating temperature range -20°C to +55°C
  • Compliant to EN 300 422 EN 300 445 (CE), FCC
1 x Shield Tram
1 x Button Hole Clip Tram
2 x Pin Clip
1 x Stud Clip
1 x Sony Shoe Adaptor
1 x Audio Envoy Shoe Adaptor
1 x Tram 6-Pin Lemo
1 x Audio 2040 IR Remote
1 x Audio TX2040 Transmitter
1 x Audio DX2040 Receiver
1 x Antenna Audio RMS 2040
2 x Antenna Audio RMS 2040 Receiver
2 x Audio Cable RX O/P for RMS 2040 Radio Mic
2 x Battery Consumables, 4xAA Batts
1 x Battery Consumables, PP3 9V
1 x Battery Consumables, A544
1 x Pouch DX 2040

You may also like…

VMI are proud sponsors of: