Hollywood 3 x cup Suction Mount (Limpet Mount)

Car Rig


Designed for lightweight DV/DVCAM cameras and can safely carry loads of up to 22.5kg (50 pounds). If you are using this device on a moving vehicle, then VMI strongly recommend that this device should only be used with a NVQ Level 3 grip as stipulated by the HSE.


This system is supplied complete with 2 x ratchet straps and foam pads to safely accommodate a secure car mount with a contingency safety provision of the ratchet straps.

Can happily mount DSLR/C300/F3/AF101/EX3 type cameras.

This CAMERA SUCTION MOUNT is ideal to safely attach a camera on a moving vehicle, aircraft, train or boat. This innovative KIT uses three strong suction cups, six universal joint clamps and a set of three 12 inch and three 18 inch rods that connect in seconds to a camera plate to position a camera or light almost anyplace. A lighting spud and stainless steel safety cable are also included.

The MOUNT weighs just six pounds. (3.5.kg) Total holding force is 200 pounds. (90kg) Maximum camera weight is 50 pounds. (22.5 kg)

The KIT comes in a sturdy metal reinforced travel case that doubles as a camera platform for low angle shots. Inside the case is a large metal base plate the lets you use the MOUNT as a Mini Tripod or Hi-Hat. You can then reverse the rods upward and use the clamps to attach other devices such as a French Flag, Monitor or Eye Light.

With the included foam pads and grips, this multi-purpose KIT can also be configured to serve as a comfortable shoulder mount.

Strong and light weight, this unique SUCTION MOUNT KIT by MICRODOLLY is a valuable and versatile production tool.

Payload: 50 pounds. (22.5 kg)

3 x 12" Tube
3 x 18" Tube
1 x Hollywood Suction Mount Main unit - Base Plate For Suction Mount
1 x Camera Plate For Suction Mount
3 x Suction Cup
6 x Universal Joint
3 x Screw for Hollywood suction mount
1 x Safety Cable (safety chain)
1 x Allen key
3 x Suction Cup Protector
1 x Lighting Spud (16mm)
1 x Camera Plate Knob

VMI are proud sponsors of: