Kino Celeb 250 2’x1′ LED with Gel Simulation and DMX control

Punchy 2x1 LED with gel simulation

£95.00 / day
£380.00 / week

The Kino Celeb 250 is a portable LED soft light which works from mains or portable 24V power, programmable colour temperature with no tube changes.  It can also simulate over 100 well known lighting gels using its own setup controls.

This is Kino Flo’s improvement on the traditional Celeb 200, which is improved in every way.  As with the Celeb 200, it is an LED panel and not a fluorescent. The Celeb 250 is a variable color LED fixture, about the size and output of a Diva 400, is fully dimmable and can accept honeycomb crates to control spill. It can be plugged in anywhere in the world and is built to be both rugged and lightweight. The light’s most remarkable feature is the addressable colour temperature, from 2700-6500 Kelvin; color can be dialed in or quickly selected via presets.

Bright and Efficient

At 5ft (5000k), the Kino Celeb 250 outputs 1,800 Lux compared with only 1,400 lux from the equivalent Diva 2’x1′, however unlike the Diva, it can be powered by batteries as well as mains and has a fully adjustable colour temperature, so time is saved in setting up.

Mimics Regular Gel operation

In the colour menu, the Kelvin range travels from 2500K tungsten to 9900K daylight, and Kino Flo has set up a fourth channel called Gel. The Gel channel includes Kino Flo presets such as blue & green screen, sodium vapor, mercury vapor and over 100 well-known lighting gels. In addition, there is also a fifth channel called Hue Angle and sixth channel, Saturation. These two channels behave similar to a traditional color wheel, where you have white light in the center, and the Hue angle determines the color along a 360-degree range, and Saturation determines how much color is applied. The second color menu provides individual red, green, blue (RGB) control. The RGB menu is a great way to work with apps with predetermined RGB presets or color wheels

Full DMX and Wireless Control

Kino Flo’s Celeb 250 LED also comes with standard DMX and wireless DMX (Lumen Radio®), 24VDC input, and universal voltage input 100-240VAC (1.2 Amps at 120V).

Flicker-free, so suitable for high speed.


  • Universal input 100VAC-240VAC or 24VDC
  • Energy efficient, draws 1.2A, 120VAC and 6.25A, 24VDC
  • Very light fixture – only 5.8kg and no external ballast required
  • Kelvin presets
  • Dial-in color temperature control between 2700K-6500K
  • Extended color pallete from 2500K-9900K
  • Green/Magenta Control
  • Hue angle and Saturation adjustments
  • RGB control
  • Works with Apps with predetermined RGB presets or color wheels
  • Can use preset buttons to store custom Kelvin settings
  • Light levels do not change when selecting Kelvin settings
  • No color shift while dimming
  • Color-correct with high color rendering index (CRI 95)
  • Flicker-free, quiet operation
  • Full range onboard and DMX dimming
  • DMX wireless link (Lumen Radio®)
  • DMX Auto Terminate
  • Fixture includes removable 90° Honeycomb Louver
  • Honeycomb louver also available in 60° as accessorySlim profile
  • Center Mount, Yoke Mount, Pole-Op
  • Mounts to stand or can hang easily from a grid
  • Accessory molded corners also used for four-point rope hang
  • Includes Flight Case

Optional: 24V block batteries powering a Keno Celeb 250 for around 3 hours is available for an additional £10 per day.

Dimensions: 71.1 x 25.4 x 43.1cm/29″ x 10 x 17″
Weight: 5.8kg/13lb

Kino Celeb 250 LED Lamp Head
Celeb 250 Mains Cable IEC
Celeb 250 1 Inch Aerial
Kino Gel Frame
Celeb-250 90 Degree Honeycomb Celeb
Celeb-250 60 Degree Honeycomb Celeb
Power Cable XLR3M - XLR3F 24v extension 2m
Power Cable XLR3M - XLR3F 24v extension 5m

You may also like…

VMI are proud sponsors of: