DJI Ronin 4D, Additional 7″ Wireless Monitor (with Remote Focus Option)

Remote Focus Thumbwheel chargeable extra

£65/day
£195/week

Additional 7" wireless monitor for integrated Ronin 4D 4-Axis Gimbal with built-in 6K Cinema Camera. *Ronin 4D not included
Manufacturer

DJI

Capture Resolution

4K, 6K

The system integrates with the 4D Video Transmitter, which is supplied with the VMI-supplied Ronin 4D camera system and permits wireless video transmission and also  wireless remote focus using the focus thumbwheel option.

With a built-in wireless video receiver, the High-Bright Remote Monitor has a 7-inch, 1,500-nit high-bright, wide colour gamut touchscreen display that can output both HDMI and SDI signals through the expansion module.

Its compact and lightweight body provides optimum portability and efficient setup so users can start shooting immediately.

Additional 7″ wireless monitor for integrated Ronin 4D 4-Axis Gimbal with built-in 6K Cinema Camera. Note that 1 x 7″ monitor is provided with the DJI Ronin 4D system and this is an additional monitor which can work with the system. Additional focus handles are chargeable.

 

General
Main Body Dimensions (length×width×height) 235×115×160 mm
Overall Dimensions (length×width×height) 309×290×277 mm [1]
Gimbal Weight Approx. 1.04 kg
Main Body Weight Approx. 1.45 kg
Overall Weight Approx. 4.67 kg (after installing all modules in the combo, excluding lens and storage card)
Max Operating Time Approx. 150 minutes [2]
Intelligent Features ActiveTrack Pro, Autofocus (supports human face/body
recognition and framing of any subject)
Storage Temperature -20° to 60° C (-4° to 140° F)
Operating Temperature -10° to 40° C (14° to 104° F)
Camera
Sensor Size 35mm full-frame CMOS image sensor
Base Lens Mount DX Mount, and support for other mount units
Supported Lens Mounts DL Mount (standard), M Mount, and E Mount
DL Lens DJI DL 24mm F2.8 LS ASPH
DJI DL 35mm F2.8 LS ASPH
DJI DL 50mm F2.8 LS ASPH
Dynamic Range 14+ stops
White Balance Manual 2,000-11,000 Kelvin and tint adjustment, supports AWB
Gamma D-Log, Rec.709, HLG
EI Range X9-8K: EI 200-12800, Dual Native ISO 800/4000
X9-6K: EI 200-12800, Dual Native ISO 800/5000
Shutter Speed Electronic Rolling Shutter 1/24s-1/8000s
ND Built-in 9-stop ND filters:
Clear, 2 (0.3), 4 (0.6), 8 (0.9), 16 (1.2), 32 (1.5), 64 (1.8), 128 (2.1), 256 (2.4), 512 (2.7)
Focus Control [3] Autofocus, Manual Focus, Automated Manual Focus
X9-6K Max Bit Rate 6008×3168, 48fps
RAW 3.4Gbps
X9-8K Max Bit Rate 8192×4320, 60fps
RAW 3.95Gbps
Supported File System exFAT
Recording Format Apple ProRes RAW HQ/Apple ProRes RAW
Apple ProRes 422 HQ/Apple ProRes 422 [4]
H.264 (4:2:0 10-bit)
Storage Media DJI PROSSD 1TB, CFexpress 2.0 Type B, USB-C SSD
DJI PROSSD 1TB Recording Format No restriction on recording format
CFexpress 2.0 Type B Recording Format [5] ProRes 422 HQ:
6K: 23.976/24/25/29.97/30fps
C4K: 23.976/24/25/29.97/30/48/50/59.94/60/72/96/100/120fps
2K: 23.976/24/25/29.97/30/48/50/59.94/60/72/96/100/120fps
H.264:
C4K: 23.976/24/25/29.97/30/48/50/59.94/60/72/96/100/120fps
2K: 23.976/24/25/29.97/30/48/50/59.94/60/72/96/100/120fps
USB-C SSD Recording Format [6] ProRes 422 HQ:
C4K: 23.976/24/25/29.97/30/48/50/59.94/60fps
2K: 23.976/24/25/29.97/30/48/50/59.94/60fps
H.264:
C4K: 23.976/24/25/29.97/30/48/50/59.94/60fps
2K: 23.976/24/25/29.97/30/48/50/59.94/60fps
Built-in Mic Built-in 2-ch stereo
Audio Format LPCM 2-ch, 24-bit 48kHz
Gimbal
Mechanical Range Pan: ±330°
Tilt: -75° to 175°
Roll: -90° to 230°
Z-Axis Range: approx 130mm [7]
Controllable Range Pan: ±285°
Tilt: -55° to +155°
Roll: ±35°
Max Control Speed (°/s) DJI Master Wheels or DJI Force Pro:
Tilt: 360°/s
Roll: 360°/s
Pan: 360°/s
Ronin 4D Hand Grips:
Tilt: 120°/s
Roll: 120°/s
Pan: 120°/s
Maximum Z-Axis Payload 2000 g (including 1040 g gimbal)
Angular Vibration Range ±0.01°
LiDAR Range Finder
Weight 88 g
Dimensions (length×width×height) 71×47×34 mm
Operating Temperature -10° to 40° C (14° to 104° F)
LiDAR Range Measurement Precision 0.3-1m (±1%)
1-10m (±1.5%)
FOV 30cm to 3m @>18% reflectivity 60° (horizontal) × 45° (vertical)
30cm to 10m @>18% reflectivity 60° (horizontal) × 7° (vertical)
Safety Rating Class 1 (IEC 60825-1:2014) (safe for human eyes)
Operating Environment Use in environments with diffuse reflective surfaces (>10%, such as walls, trees, people, etc.)
DO NOT use in environments with dense fog or aim it at or through glass surfaces.
Laser Wavelength 940 nm
Single Pulse Width Two kinds of pulses emit in circulation: 5ns and 33.4ns.
Max Laser Power 6 W
Main Monitor
Screen Size 5.5 inches (diagonal)
Resolution 1920×1080
Refresh Rate 60 Hz
Max Brightness 1000 cd/m²
Screen Rotational LCD touchscreen
Battery
Battery Type TB50 Intelligent Battery
Capacity 4280 mAh
Energy 97.58 Wh
Voltage 22.8 V
Max Charging Voltage 26.1 V
Max Charging Power 180 W
Charging Temperature Range 5° to 40° C (41° to 104° F)
Charging Time Approx. 1.5 hours (with standard 86W power adapter)
DJI O3 Pro Video Transmission
Max Transmission Distance 20,000 ft (approx. 6km, FCC-compliant) [8]
Max Transmission Resolution and Frame Rate 1920×1080 @60fps
Minimum End-to-End Latency 100 ms or 68 ms [9]
Wireless Frequency Non DFS frequency band:
2.400-2.483 GHz
5.150-5.250 GHz
5.725-5.850 GHz
DFS Frequency Band: [10]
5.250-5.350 GHz
5.470-5.600 GHz
5.650-5.725 GHz
Transmitter Power (EIRP) 2.400-2.4835 GHz:
≤33 dBm (FCC); ≤20 dBm (SRRC/CE/MIC)
5.150-5.250 GHz
<23 dBm (FCC/SRRC/MIC)
5.250-5.350 GHz:
<30 dBm (FCC); <23 dBm (SRRC/MIC)
5.470-5.600 GHz, 5.650-5.725 GHz:
<30 dBm (FCC);<23 dBm (CE/MIC)
5.725-5.850 GHz:
<33 dBm (FCC/SRRC); <14 dBm (CE)
Max Bandwidth 40 MHz
Max Bitrate 50 Mbps
Interface
Main Body 3.5mm TRS Stereo Input Jack × 1 (supports mic, plug-in power mic, and line inputs)
3.5mm Stereo Output Jack × 1
USB3.1 Type-C Data Port × 1
6-pin 1B DC-IN (DC 12-30 V) × 1
Battery Mount Power Port (female) × 1
4D Expansion Plate Data Port (female) × 1
High-Bright Main Monitor Port × 1
Hand Grips Port × 2
Top Handle Port × 1
HDMI Type-A Video Output Port × 1 [11]
X9 Gimbal LiDAR Range Finder/ Focus Motor Port × 2
TB50 Battery Mount Battery Mount Power Port (male) × 1
TB50 Battery Port × 1
4D Video Transmitter
Dimensions 89×21×137 mm
4D Video Transmitter Port 4D Expansion Plate Data Port (male) × 1
SMA Antenna Connector × 4
USB 3.1 Type-C Data Port × 1
Battery Mount Power Port (female) × 1
Battery Mount Power Port (male) × 1
Remote Monitor
Dimensions 216×58×166 mm (includes monitor cage)
Screen Size 7 inches (diagonal)
Max Brightness 1500 cd/m²
Screen Resolution 1920×1200
Refresh Rate 60 Hz
Max Battery Life Approx. 2 hours [12]
Operating Temperature 0° to 40° C (32° to 104° F)
Storage Temperature -20° to 60° C (-4° to 140° F)
Power System DJI WB37 Battery/NP-F series Battery (requires NP-F battery
adapter)
Remote Monitor Port 3.5mm Stereo Jack × 1
microSD Card Slot × 1 [13]
HDMI Type-A Video Input Port × 1 [14]
Remote Monitor Expansion Plate High-Speed Port (female) × 1
Remote Monitor Accessory Expansion Port × 1
USB 3.1 Type-C Data Port × 1
Remote Monitor Expansion Port Remote Monitor Expansion High-Speed Port (male) × 1
HDMI 1.4 Type-A Video Output Port × 1
6-pin 1B DC-IN (DC 6.8-17.6 V) × 1
3G-SDI (Level A) BNC Video Output Port × 1
Notes
1. Measured when 6K Combo is fully set up with the main monitor attached and the Z-Axis off.
2. Measured with a fully charged TB50 Battery and Ronin 4D in a still state with the gimbal balanced, the Z-Axis inactive, and continuously recording in RAW. Gimbal movements or use of the Z-Axis will reduce operating time.
3. Autofocus on manual lenses requires DJI Zenmuse X9 Focus Motor.
4. Supported through a future firmware update.
5. Please use recommended CFexpress cards.
6. Please use recommended USB-C SSD.
7. Stabilization range of the Z-Axis is subject to change based on Z-Axis modes and usage scenarios and may be smaller than the mechanical range.
8. Unobstructed, free of interference.
9. 100ms is measured at 4K/24fps, 68ms is measured at 4K/60fps.
10. Some frequency bands may not be available depending on the legal policies of the region the monitor was activated in.
11. Currently supports HDMI 1.4 and will support HDMI 2.0 in a future firmware update.
12. Measured at 50% screen brightness with DJI WB37 battery.
13. This port is currently not available. Will support internal recording in a future firmware update.
14. This port is currently not available. Will support HDMI 1.4 in a future firmware update.
1 x 13 Amp USB Plug / Charger
2 x Data Cable USB-A 3.0 to USB-C
1 x DJI RONIN 4D 7" Wireless Monitor.
4 x DJI RONIN 4D Stubby Aerial
1 x DJI RONIN 4D Wireless Monitor Sun Hood
4 x DJI RONIN WB37 Li-Ion battery 7.6v 4920mAh
2 x DJI WCH3 Dual Battery Charger for WB37 batteries
2 x DJI RONIN 4D Wireless Monitor Rosette Mount Left/Right Hand

You may also like…

VMI are proud sponsors of: