Camera kits

Easyrig Vario 5 (+110mm arm)/Flowcine Serene (cameras 5-17kg/30-55 lb)

Easyrig Camera Body Mount with extendable arm and Flowcine attachment

NEW!
  • Description
  • Rates & Packages
  • Other Information

The extension arm version of the Easyrig Vario 5 with Flowcine attachment.  The Easyrig unit supports a 5-17kg payload capacity and the Serene device can take camera setups between 6-19.5 kg.  Both the Easyrig and Serene are adjustable to vary the strength of support/spring tension without tools.  

In common with all Easyrig systems, This system spreads the weight onto the operator's body using a a body harness which is especially useful with today’s configurable and modular camera systems, the extension arm makes it more suitable for gimbal type productions and the addition of the Flowcine attachment dampens walking movement.

Gimbals are heavy and walking produces a noticable motion which is hard to avoid, so the combination of the Easyrig and Flowcine Serene helps both to support the camera and avoid the motion "walking" movement in your shot.  The FlowCine Serene arm attached to an EasyRig and introduces vertical dampening to the system to give a smoother shot.  Another benefit is that it also throws the pulley forward, which is very helpful when trying to film with a camera out in front of you. 

One other advantage of the Flowcine system is that it also stabilises side to side errors in the same scenarios by counter pivoting around it’s center axis. At the same time you have full use of the Easyrig cord extension that will allow you to go from high to low mode while at the same time the Serene will take care of the vertical and side to side stabilisation adding two more stabilised axis to your existing system.  In short, when walking or running with a gimbal, then this combination makes your shots silky-smooth.

By fitting this to the extension arm version of the Easyrig, the weight of the entire unit is spread onto the operators body and the extension arm give additional space when working with larger form-factor cameras.

It is ideal for many other hand-held situations where stability is crucial and where the freedom to move is essential and smooth movement shots are required.

The extension arm version of the Easyrig Vario 5 with Flowcine attachment.  This supports a 5-17kg payload capacity with an adjustment to vary the strength of support.  The extension arm makes it more suitable for gimbal type productions and Flowcine attachment dampens walking movement.

In common with all Easyrig systems, it spreads the weight onto the operator's body using a a body harness which is especially useful with today’s configurable and modular camera systems.

Please read our article Easyrig - all you need to know

more...


  • Rate:
    £175/day £525/week Add to Shoot Kit

Please read our article Easyrig - all you need to know

VMI are proud sponsors of:

The British Society of Cinematographers The Guild of Television Cameramen The Guild of British Camera Technicians Plasa - Rental Guard Plasa member Cinematography Mailing List Xhire - Anri fraud network