Accsoon CineEye 5G Wireless HDMI Transmitter

High Definition Live Video Monitoring Transmitter to iOS Devices over WiFi


The Accsoon CineEye Wifi HDMI Transmitter is a pocket-sized HD transmitter which transmits to 4 x separate smartphone and tablets, which can be used as portable wireless monitors for your camera. Connect to 4 devices simultaneously. Up to 4 hours on a single charge. 100m range with HDMI input.


Video –
Video Inputs 1 x SD/HD-SDI (75 Ohm BNC)
1 x HDMI Type-A receptacle
Bonding –
Bonding None
Supported Input Resolutions –
Supported Resolutions 1080p 23.98/24/25/29.97/30/50/59.94/60*
1080i 50/59.94/60
1080PsF 23/24/25/29/30
720p 50/59.94/60
480p (for HDMI input only)
576p (for HDMI input only)
*Ingests 1080p50/59/60
Video Processing –
Video Compression H.264, Baseline, Main and High Profile
Supported Video Bitrate 250 Kbps to 15 Mbps*
*15 Mbps (wired), 10 Mbps (WiFi)
Supported Video Bitrate Details 5 Mbps
4 Mbps
3 Mbps
2.5 Mbps
1.5 Mbps
1 Mbps
750 Kbps
Supported Output Resolutions Configured via Vuer app:
Test Pattern Generator Support Supports Custom Test Pattern
Video Format Conversion Support Built in Video Scaler and Deinterlacer
Colour Correction None
Protocol Support –
Network Protocols TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
Supported Video Transport Protocols Teradek Streaming Protocol (compatible with Teradek Apps, e.g. Live:Air, Vuer)
Remote Control No Core Support
Software Or Platform Integration Streaming Platforms not supported directly through device but via the Live:Air app
Audio Processing –
Audio Compression AAC-LC, MPEG Layer 2
Inputs –
Audio Input Embedded Audio Input
Analog Line or Mic in, adjustable gain
Outputs –
Audio Output
No audio output
Physical –
Dimensions 4.75″W x 3″D x 1.1″H [120.7 x 76.2 x 27.9mm]
Weight 11.6oz [328.9g]
Construction Milled Aluminium
Interfaces –
Http WebUI for Configuration and Control
Configuration Interfaces OLED Display with joystick Navigation buttons
Feature-rich WebUI for configuration and control
Switches On/Off and Reset Switch
Recording Storage No Recording
Mobile App Vuer, Live:Air
Usb Interface Functionality None
Network –
Ethernet 10/100/1000 BASE-T Gigabit
Wireless WiFi: 2.4/5GHz 802.11 ac/a/b/g/n MiMo
Usb None
Rf Channel Selection Auto with 3 modes: (2.4 or 5 Ghz), Auto (2.4 GHz only), Auto (5 Ghz only)
Configurable to specific channels
Power –
Power Input 2 Pin Connector Power input
Battery No Battery Included
Nominal Power Consumption 8W, 7W (no WiFi)
Auxilary Power Input 6-28V DC
General –
Mountability Can be mounted horizontally or vertically with
1/4″ 20 mounting holes
1 x Teradek Serv Pro WiFi Transmitter
2 x Aerial Alexa/ Bolt 2000/600 RX Articulated 4"Small
1 x Vision Cable BNC-BNC 1m
1 x Data Cable HDMI- HDMI, 1m
1 x Power Cable Teradek AC-2 Pin Lemo 36w (ServPro)
1 x Data Cable CAT5E Ethernet cable 1m
1 x Vision Cable BNC-BNC 50cm

You may also like…

VMI are proud sponsors of: