Teradek Bolt Pro 1000 XT.4

Teradek Bolt Pro1000 XT HD wireless quad receiver

Teradek Bolt Pro1000 XT mini wireless link (quad receiver)

£413/day
£1,239/week

Summary

Quad receiver version of compact, zero-delay Teradek 1000 XT 3G-SDI wireless video system with a range of up to 1000ft (300m) of line of sight.
Manufacturer

Teradek

Additional Info

Unlike other versions, these systems include male and female V-lock clip clips attached to the receivers, so that they actually dock to the monitor and the battery, for ease of operation.

Features include a loop-through HD-SDI input on the transmitter, dual HD-SDI outputs on receiver and 1 x transmitter, 4 x receivers and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyser to keep an eye on interference in your area.

At less than 1ms latency, Bolt Pro 1000 can transmit 1080p60 4:2:2 video at up to 1000ft line of sight over the unlicensed 5GHz band.

Features include a loop-through HD-SDI input on the transmitter, dual HD-SDI outputs on receiver & internal battery and the Bolt XT system offers backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt.

Bolt transmits uncompressed video using WSDI Pro, which provides a wireless range of up to 1000ft and can coexist with other wireless equipment by dynamically adjusting the frequency bands used in real time. In addition to transmitting the video, Bolt’s 3G-SDI loop-through with active line drivers allows you still use the camera’s SDI output for onboard recorders or monitors.

Specifications

Specifications

Bolt XT 1000 SDI/HDMI Wireless TX
Video-
Video Inputs 1 x SD/HD/3G-SDI (75 Ohm BNC)
1 x Type A receptacle HDMI
Video Outputs 1 x HD/SD/3G-SDI Loop-out (75 Ohm BNC)
Sdi Ancillary Data Support supports metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
https://support.teradek.com/hc/en-us/articles/217446087
Colour Sampling SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx <0.001sec (without format conversion)
Supported Resolutions-
Supported Resolution 1080p 23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL)
Video Processing-
Video Compression Visually lossless
Colour Correction CDL/1024 1D LUT (supports 10-bit color)
33x33x33 3D LUT (supports 10-bit color)
Audio Processing-
Audio Compression 48kHz 24-bit PCM
Inputs-
Audio Input Embedded Audio Input
Physical-
Dimensions 24mm x 66mm x 101.5mm
0.95″ x 2.6″ x 4.47″
Weight 226g
8oz
Construction Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability Multiple mounting options with M3 and 1/4″ holes
3/8″ ARRI style accessory mount
Interfaces
Http None
Configuration Interfaces None
Switches On/Off and Reset Switch
Desktop App Feature-rich Bolt Manager Application for OSX & Windows
USB Interface Functionality Upgrade via Mini-USB
Network-
Wireless Non-DFS Frequencies:
US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
EU & JP: 5.19 ~ 5.23 GHz
DFS Frequencies:
US: 5.27 ~ 5.55 GHz and 5.67 GHz
EU & JP: 5.27 ~ 5.67 GHz
Rf Channel Selection Auto and Configurable Channel Selection
Encryption AES-128
Rf Power 17 dbm EIRP (with one 2 dbi TX antenna)
Range Up to 1000 ft line of sight
Unicast Multicast Unicast/Multicast
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Power-
Power Input 2-Pin Connector 7-28 VDC
Battery None
Nominal Power Consumption 7.5 Watts (Measured at 1080p60)
Environmental-
Operating Temperature 0 ~ 40 deg-C
Bolt XT 1000 SDI/HDMI Wireless RX
Video-
Video Outputs 1 x SD/HD/3G-SDI (75 Ohm BNC)
1 x HDMI Type-A receptacle
1 x USB 3.0 micro B receptacle
Sdi Ancillary Data Support supports metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
https://support.teradek.com/hc/en-us/articles/217446087
Colour Sampling SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx <0.001sec (without format conversion)
Supported Resolutions-
Supported Resolution 1080p 23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL)
Video Processing-
Video Compression Visually lossless
Test Pattern Generator Support Yes
Colour Correction CDL/1024 1D LUT (supports 10-bit colour)
33x33x33 3D LUT (supports 10-bit colour)
Audio Processing-
Audio Compression 48kHz 24-bit PCM
Inputs-
Audio Input Embedded Audio Input
Physical-
Dimensions 89 x 138 x 24mm
3.5″ x 5.4″ x .95″
Weight 376g
13.3oz
Construction Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability Multiple mounting options with M3 and 1/4″ holes
Interfaces
Http None
Configuration Interfaces OLED Screen with Menu Joystick Navigation
Switches On/Off and Reset Switch
Desktop App Feature-rich Bolt Manager Application for OSX & Windows
USB Interface Functionality Upgrade via Mini-USB
Network-
Wireless Non-DFS Frequencies:
US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
EU & JP: 5.19 ~ 5.23 GHz
DFS Frequencies:
US: 5.27 ~ 5.55 GHz and 5.67 GHz
EU & JP: 5.27 ~ 5.67 GHz
Rf Channel Selection Auto and Configurable Channel Selection
Encryption AES-128
Rf Power 17 dbm EIRP (with one 2 dbi TX antenna)
Range Up to 1000 ft line of sight
Unicast Multicast Unicast/Multicast
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Power-
Power Input 2-Pin Connector 7-28 VDC
Battery None
Nominal Power Consumption 8.5 Watts (Measured at 1080p60)
Environmental-
Operating Temperature 0 ~ 40 deg-C

Resources

Resources

Related equipment

You may also like…

VMI are proud sponsors of: